WattPerchMenu

Method

How the numbers are made

Every figure on a result comes from code and public data, never from a language model. Here is what the code does, what it assumes, and what it cannot know.

What goes in

Your ZIP code, how the panel is mounted, which way it faces, how much shade it gets, and when someone is home during the day.

The ZIP code gives the place and the state. Everything else you choose in the form, and every choice stays visible on the result, where you can change it. If you have your bill at hand, you can also enter your own rate per kWh.

What the code works out

Output, hour by hour

The panel’s output for your place, mount and direction comes from a federal solar-output service (PVWatts). The result names it as a source.

The share you use

Each hour, what the panel produces is compared with what the home uses during that hour. What the home uses right then counts as power you use. The rest flows back to the grid.

Power that flows back earns nothing

The laws we have read leave plug-in systems out of net metering, or they say nothing about paying for power sent back to the grid. So only the power you use yourself counts as savings.

Savings

The power you use yourself, in kWh per year, times a rate per kWh: your own from your bill if you enter it, otherwise your state’s average residential price. The result says which one it used.

Payback

A kit’s price divided by what it saves per year. With no price, there is no payback, and the table says so instead of guessing one.

Where the rate comes from

Your state’s average

Unless you enter your own, the rate is the average price per kWh that residential customers in your state paid in one month, as published by the U.S. Energy Information Administration (EIA). It is one figure for the whole state: every utility and every residential tariff there together, not the rate of your utility.

How old it is

We use the latest month EIA has published for your state. EIA publishes each month’s figures some time after the month has ended, so the figure is always from a month in the past. The result prints which month it is, next to the rate.

Why your own bill is better

Your bill shows what you actually pay: your utility, your tariff, its tiers or times of day. A state average can be well above or below that. Enter the price per kWh from your bill in the result’s assumptions, and the savings and payback are calculated again using your rate.

What is assumed, and shown

Two things in a result are not measured: when your household uses power during the day, and how much your shade costs. Both are set from your choices in the form and printed on the result as assumptions, with the values the calculation used. If they do not fit your home, change them and ask again.

The day chart shows one representative summer day for the 800 W kit, hours 5 to 20. It is there to show the shape of a day, when the panel makes more than the home uses and when it makes less.

The calculation covers kits of 400 W and 800 W, and each kit on the Kits page whose panel and inverter watts are verified. Batteries are not part of it yet.

How the kits are worked out

Where a kit’s values come from

Panels, inverter output, what is in the box, the certification wording and the price come from the seller’s product page, read on November 21, 2026. Where a maker sells no complete kit, we read the retailer that does, and say so.

The inverter’s limit

A kit’s output starts with the 800 W simulation adjusted to match the kit’s panel watts, then capped each hour at the kit’s inverter AC output. What lies above that is cut off, as the inverter would cut it.

What that assumes

That the kit’s inverter converts as efficiently as the one PVWatts models. The cap works on hourly averages, so a few minutes above the limit during an hour are not cut off. A kit with more panel watts than inverter watts may come out slightly high. Ratings given in VA count as watts, and several inverters in one kit are added up.

A kit’s payback

The kit’s price on the day we read it, divided by what that kit saves per year at your address. A kit whose price we could not verify gets no payback.

Within a state’s size limit

When the kit’s inverter AC output is no more than the limit in the statute. We compare the kit on its own, and we compare size only. Where the limit is not yet verified, or the state has no law, the page says so and makes no claim.

Prices change

Each price is printed with the day we read it. When a price is more than 14 days old, our build lists it for another check. We never change or hide a price without reading the seller’s page again.

What it cannot know

Weather changes from year to year. A real year will differ from the estimate.

It does not know your exact railing, your neighbor’s tree, or what your landlord will say. It does not know your utility or your tariff: without your own rate it uses your state’s average, which can differ from what you pay. Enter your own rate if you have it. Rates change. The result shows the rate it used, and if it used the average, it shows the month.

How the state rules are read

Every fact on a state page comes from the statute: enrolled or chaptered bill text, a code site, or an official legislature or governor page. Each fact shows its source and the day we checked it. A tracker or a news page may lead us to a bill; it is never the source of a value we show.

Where we could not read the statute yet, the page says “not yet verified from the statute” and shows nothing in its place, and the calculator says the same for addresses in that state.

This is general information, not legal advice.

Data and sources